Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

A floating-point genetic algorithm for solving the unit commitment problem

This paper proposes a floating-point genetic algorithm (FPGA) to solve the unit commitment problem (UCP). Based on the characteristics of typical load demand, a floating-point chromosome representation and an encoding–decoding scheme are designed to reduce the complexities in handling the minimum up/down time limits. Strategic parameters of the FPGA are characterized in detail, i.e., the evaluation function and its constraints, population size, operation styles of selection, crossover operation and probability, mutation operation and probability. A dynamic combination scheme of genetic operators is formulated to explore and exploit the FPGA in the non-convex solution space and multimodal objective function. Experiment results show that the FPGA is a more effective technique among the various styles of genetic algorithms, which can be applied to the practical scheduling tasks in utility power systems.     

钯作基体改进剂FIA－HG－GFAAS法测定锗及其机理研究

采用钯，钯－镁作基体改进剂，ＦＩＡ－ＨＧ－ＧＦＡＡＳ法成功地测定了锗。灵敏度、精密度和分析速度都得到很大的提高。峰值吸收的特征质量８．０ｐｇ，检出限１０．９ｐｇ，相对标准偏差０．３４％，同时探讨了基体改进剂钯的稳定作用机理及锗在石墨管中的原子化机理。     

Applications of fast atom bombardment mass spectrometry (FAB MS) to organometallic and coordination chemistry

This article describes the technique of fast atom bombardment mass spectrometry (FAB MS) and its applications to the analysis of organometallic and coordination complexes. Sections on ion generation and matrices are followed by a Periodic Group-based review of FAB MS results obtained from Transition Metal and Main Group compounds, organometallic cluster carbonyls and their derivatives, and salts of poly-oxo-anions. The literature has been surveyed from 1981 to approximately mid-1986.     

High resolution staring arrays answering compact MW and LW applications

This paper overviews the electro-optical and thermal performances of different types of infrared detectors manufactured by Sofradir. The detector’s fabrication processes and detector’s performance are shortly described. New staring arrays are more compact and offer system solutions required by infrared market. Special attention is directed to some reliability advantages of new dewar design. Finally, the development trends for highest resolution infrared detector are discussed. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 59570U (2005).     

驻波型热声制冷机熵产分析

声制冷机是一种新型制冷机,具有无机械运动部件,可靠性高寿命长,采用惰性气体为工质无污染等优点．驻波型热声制冷机的声功泵热效应是不可逆过程,内部不可逆损失导致热声制冷机效率偏低,制约了热声制冷机的发展和应用．本文研究了线性范围内驻波型制冷机换热器和回热器内的可压缩振荡流动与传热过程的熵产,分析了板间距,振荡频率和温度梯度对熵产的影响。     

相干叠加态高次谐波发射的时间行为分析

本文研究了一维模型分子离子(初态为基态和一个激发束缚态叠加的相干态)在超强超短激光脉冲作用下的谐波发射谱.我们发现在高次谐波谱平台区域出现了周期性的结构变化.我们利用小波变换对谐波谱进行了暂态时间频率分析,结果表明该谐波结构产生的原因是由电离电子返回母离子时与不同束缚态复合而产生的谐波光脉冲之间相干叠加.同时采用半经典计算,对所得到的计算结果进行了分析,验证了我们的结论.     

光学相干控制中脉冲光束等相面的实时测控

描述了飞秒脉冲基频光、倍频光光束位相差对相干控制光电流注入的控制作用，提出一种控制基频光、倍频光在全光孔径干涉光场内的等相面保持一致的实验方案，制作了一套相位差稳定自动控制系统，并应用于光学相干控制光电流实验中，获得较好的实时控制结果.